Price quotation of 1000W fiber laser cutting machine becomes a hot spot
1000W fiber laser cutting machine performance advantages
The most important and meaningful advantage of fiber cutting technology should be its energy efficiency. With the complete solid-state digital module and single design of the fiber laser, the fiber laser cutting system has a higher electro-optical conversion efficiency than carbon dioxide laser cutting. For each power supply unit of the carbon dioxide cutting system, the actual general utilization rate is about 8% to 10%. For fiber laser cutting systems, users can expect higher power efficiency, about 25% to 30%. In other words, the overall energy consumption of the fiber cutting system is about 3 to 5 times less than that of the carbon dioxide cutting system, which improves the energy efficiency to more than 86%.
Fiber laser has the characteristics of short wavelength, which improves the absorption of the cutting material to the beam, and enables cutting such as brass and copper as well as non-conductive materials. A more concentrated beam produces a smaller focus and a deeper depth of focus, so that the fiber laser can cut thinner materials quickly and cut medium-thick materials more effectively. When cutting materials up to 6mm thick, the cutting speed of a 1.5kW fiber laser cutting system is equivalent to that of a 3kW carbon dioxide laser cutting system. Because the operating cost of fiber cutting is lower than that of a common carbon dioxide cutting system, this can be understood as an increase in output and a reduction in commercial costs.
Processing advantages of 1000W fiber laser cutting machine
1. Excellent cutting performance. Because the fiber laser cutting machine has excellent beam quality, small spot, and continuous light output, the cutting line is finer, the work efficiency is higher, and the processing quality is better.
2. Low processing cost. The photoelectric conversion rate of fiber laser cutting machine can reach about 30%, which is 3 times that of CO2 laser cutting machine and 10 times that of YAG solid laser cutting machine. The power consumption is only 20-30% of CO2 laser cutting machine. Moreover, the maintenance cost is low, no reflective lens is required, and the loss of consumables is much less than that of YAG.
3. Long service life. The fiber laser cutting machine adopts imported laser, which is very stable in performance, and its service life can reach 10W hours.
Nowadays, more and more machine tool suppliers are under the name of Industry 4.0. Launched various automation products. Then it turned into a decoration due to low cost performance. In fact, the purpose of Industry 4.0 is to better promote the development of industry, so as to optimize products and profit for enterprises. Therefore, automation equipment should also be people-oriented, and equipment that maximizes the interests of customers is good equipment.
