Some customers often ask, in our use of fiber laser cutting machine, how to maintain the life of the fiber laser cutting machine as much as possible? Only by mastering the maintenance skills of the fiber laser cutting machine can the efficiency of the equipment be better played and the work efficiency of the equipment can be maximized. Here are some maintenance tips to share with you.
1. Keep the steel belt tight at all times
The steel belt plays a very important role in the operation of the laser cutting machine, and the material of this steel belt is steel. If the steel is not tightened during use, it is easy to cause the cut objects to be thrown away. The steel belt may even slip off the track, which poses a great threat to the safety of the staff. Therefore, no matter when and where, the steel belt must be kept in a tight state so as to prevent the construction The safety of personnel plays a certain protective role.
2. check the angle of the tool regularly
2. check the angle of the tool regularlyCheck the straightness and parallelism of the track and the perpendicularity of the cutting head every six months, and maintain and debug if it is abnormal. Because the straightness, parallelism and perpendicularity of the cutting head directly affect the cutting accuracy. If you do not check regularly, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected.
3. Frequently sweep the dust inside the machine
The working principle of fiber laser cutting machine is to directly vaporize the metal surface to achieve the cutting purpose when cutting. In this way, a lot of dust will be generated on the surface and inside of the cutting machine. We should often use a vacuum cleaner to suck out the dust, so as to ensure that the parts inside the machine are spotless, so that the parts can be normal. Running.
4. Parts should be treated with lubricant frequently
We need to lubricate the racks, rails, and many parts of the cutting machine from time to time, so that they can ensure that the gears are very accurate during operation. In this way, the operation of the machine will be in the normal running track, and the precision of the cut products will be higher.
