Skip to content
annealing process

The principle and application of fiber laser cutting machine annealing process

  • News
  • 3 min read

The principle and application of fiber laser cutting machine annealing process



Most users pay more attention to its annealing process when buying a fiber laser cutting machine, because the annealing process is conducive to the stability of the laser cutting machine’s performance. So what is the annealing process of the laser cutting machine? Presumably this is also a question that everyone is very concerned about. Here are some insights from the editor.

When purchasing laser cutting, we pay more attention to the configuration of the laser cutting machine. While selecting a good laser, we also pay attention to the choice of machine tool. A good machine tool plays an important factor in cutting accuracy and stability. Therefore, the manufacturing process of the machine tool occupies an important position in the assembly of the entire laser cutting machine.

In order to increase the stability of the laser cutting machine, the general manufacturer will cast the entire bed with a steel structure, and an annealing process is also required.

Explanation of annealing process terms:

The so-called annealing process is to heat the steel to a certain high temperature and keep it at this temperature for a period of time, and then let it slowly cool down, which is called annealing. The annealing of steel is a heat treatment method in which the steel is heated to a temperature at which phase transformation or partial phase transformation can occur, and then slowly cooled after heat preservation.

Purpose of annealing process:

The purpose of annealing is to reduce structural defects, improve the structure to homogenize the composition and refine the grains, increase the mechanical properties of steel, and reduce residual stress; at the same time, it can reduce the hardness, increase the plasticity and toughness of the laser cutting machine, and improve the cutting performance. . Therefore, annealing is not only to reduce the structural defects and internal stress generated in the previous process, but also to prepare for the subsequent process.

Annealing process is one of the processes to increase the service life of laser cutting machine tools, which can increase its own physical properties and enable high-quality production of laser cutting machines.

The annealing process of laser cutting machine is like this, it can also extend the service life of laser cutting machine, so it is welcomed by everyone.

annealing process

WeCreativez WhatsApp Support
Krrass customer support team is here to answer your questions. Ask us anything!
Hi, how can I help?